品牌芯源MPS
产品电源DCDC
功能升压 降压 升降压
功能2电机驱动
功能3车规电子
Silicon and Package Innovation
1st gen
2nd gen
3rd gen
• First 2A/3A sync Buck in SOIC8
(5x6mm) pkg in the world – since 2005
• More than 20+ p2p competitors
• First 2A /3A sync Buck in SOT23
(3x3mm) pkg in the world – since 2011
• TI also dev. P2P part
• Other 5+ p2p competitors
• First 2A /3A sync Buck in SOT563/SOT583
(1.6x1.6mm) pkg in the world – since 2015
MPS has lead the DC/DC market over the last 10 years with advanced BCD
device process and assembly/packaging technology.
Additionally, MPS also offers industry-leading power converters in
QFN and CSP packages
MPQ7908/28 - 18V, 4 Rail Power Management IC with Safety Monitoring
Key FEATURES
• 3 Synchronous Buck Regulators
− 2x 600mA
− 1x 1A
• 1 LDO Rail (200mA)
• Integrated safety functions (for MPQ70240FS only)
Analog built in self-test
Memory/OTP CRC check
Reference monitor
• Rich Protections
OCP/SCP, Vo OVP&UVP, Thermal warning/shutdown
• Symmetric input cap for better EMI
• PMBus/I2C Compliant interface with PEC to program
Dynamic adjustment Vo
Adjustable on/off delay, soft start time
Flexible PG indicator configuration
Light load mode selection
Configurable frequency spread spectrum for better EMI KEY SPECS
Input Voltage 3.5V – 18V
Output Current 600mA, 600mA, 1A, 200mA
Switching Freq. 2.2MHz / 3.3MHz
Package QFN-15 (2.5mmx3.5mm),
Wettable flank

MPQ2177/78/79, 5.5V Sync 3/2/1A Buck
Features
Wide 2.5V to 5.5V Operating Input Range
Peak 3/2/1A Continuous Current
2.4MHz Switching Frequency
60/35mΩ Low RDS(ON) Internal Power MOSFETs
FCCM
Power Good (PG) Indicator
External Soft-Start selectable
Duty On
Output Discharge
Tj 150C
Fully Protection include OVP/OTP
Short-Circuit Protection with Hiccup Mode
Available in a QFN-8 (1.5mmx2mm)Package
Available in AEC-Q100 Grade 1

MPQ4572 60V2A Buck
Features
• Wide 4.5V to 60V Operating Input Range
• 2A Continuous Output Current
• High-Efficiency, Synchronous Mode Control
• 250mΩ/45mΩ Internal Power MOSFETs
• Configurable Frequency Up to 2.2MHz
• 180°Out-of-Phase SYNC Out Clock
• 40μA Quiescent Current
• FB-Tolerance: 1% at Room Temp, 2% at Full Temp
• Selectable AAM or Forced CCM Operation during Light-Load Conditions • Power Good Indicator
• Low-Dropout Mode
• Short-Circuit Protection with Hiccup Mode
• VIN Under-Voltage Lockout (UVLO)
• Thermal Shutdown
• Available in a QFN-12 (2.5mmx3mm) Package
• Available in a Wettable Flank Package

MPQ3367 6CH Backlighting LED Driver
• 3.5V to 36V Input Voltage Range
• 6 Channels with Max. 150mA per Channel
• Internal 100mΩ, 50V MOSFET
• Programmable Up to 2.2MHz Fsw
• Multi-Dimming Operation Mode thru PWM input
Including:
1. Direct PWM Dimming
2. Analog Dimming
3. Mix Dimming with 25%/12.5% transfer point
• 15000:1 Dim Ratio in PWM Dim at
Fpwm≤200Hz
• Excellent EMI Performance, Frequency Spread
Spectrum
• I2C Interface
• Phase Shift Function for PWM Dimming
• 2.5% Current Matching
• Optional LED Current Auto Decrement at
High Temperature
• LED Short/Open, OTP, OCP, Inductor
Short Protection
• Fault Indicator Signal Output
• QFN24-4mmX4mm and TSSOP28-EP Package
• AEC-Q100
MP6570- senor with FOC • 3.3V Typical Vcc • 14bit Resolution Angle Sensor • FOC Control • Position/Speed/Torque Mode • I2C/SPI/RS485 Interface • PWM/Clock Input Mode • 10-bit ADC w/ Programmable Gain • 1kHz to 80kHz Switching Frequency • Selectable Internal/External Oscillator • Support External Sensor Input • 16 Programmable Slaver Address • Non-Volatile Memory • Standby Mode • Coasting/Fast/Close-Loop Brake Mode • Input-Bus Voltage & Current Protection • OCP/Lock/Power Stage Fault Protection
http://qq1299968664.b2b168.com