品牌芯源MPS
产品电源DCDC
功能升压 降压 升降压
功能2电机驱动
功能3车规电子
Product Families
MV Buck: 18V/1-5A; 18V/6-30A; 24V/1-12A;
HV Buck: 28V-100V
E-Fuse / Load Switch
LDO
LNB
DC-DC PMIC Products
Supervisory
Half-Bridge Driver
DC-DC LED Driver
Signal Isolator
MP1601N – 1A, Sync, Step-Down Switcher
FEATURES
• Wide 2.5V to 5.5V Operating Input Range
• Output Adjustable from 0.6V
• Up to 1A Output Current
• Low IQ: 20μA • 1.2MHz Switching Frequency
• EN for Power Sequencing
• 1% FB Accuracy
• COT control offers fast transient response
• Duty On
• Output Discharge
• Short-Circuit Protection with Hiccup Mode
Available in a SOT563 Package
APPLICATIONS
• Wireless/Networking Cards
• Portable and Mobile Devices
• Battery-Powered Devices
• Low-Voltage I/O System Power

MPQ70330FS / MPQ7901: 42V, 2A HVBuck, 1.5A LVBuck, 0.25A LVBoost Radar PMIC
Wide Input Voltage Range (4.5V to 42V)
Low Quiescent and Shutdown Current
Frequency Synchronization Up to 2.4MHz
Spread Spectrum for EMI Reduction
HV Synchronous Buck Regulator
• 200mΩ/45mΩ Internal MOSFETs
• 2A Continuous Output Current
LV Synchronous Buck Regulator
• 55mΩ/20mΩ Internal MOSFETs
• 1.5A Continuous Output Current
LV Synchronous Boost Regulator
• 18mΩ/13mΩ Internal MOSFETs
• 250mA Continuous Output Current
Safety Features and Advance Monitoring
Window or Question-Answer Watchdog
SPI with CRC
Multi-Page One-Time Programmable(MOTP) Memory
Support System up to ASIL D
ISO26262 Functional Safety Compliant
QFN-34 (6mmx6mm) Package with Wettable Flank
Safety Features, Advance Monitoring
•Independent Voltage Supervisor
•Power FET Leakage Monitoring
•Short-Circuit, Overcurrent Protection
•Battery Failure Pre-Warning
•Redundant Bandgap, Clock and VCC
•Buffered Voltage Reference Output
•Thermal Warning / Thermal Shutdown
•Fail-Safe State Machine
•Built-in Self-Test (BIST)
•Clock Monitor
•Reset and Interrupt to Microcontroller
•Error Input Signal Monitoring
•Protected Memory and Registers
•Diagnostic Output Pin
Versions:
• MPQ70330FS – ASIL
• MPQ7901 – QM
Applications:
• Automotive Camera Module
• Automotive Sensor Applications

36V, 3A, Low Quiescent Current Synchronous Step Down Converter
Features
• Designed for Automotive Applications:
• Survives 42V Load Dump
• Supports 3.1V Cold Crank
• Continuous Output Current 0.5A-3A
• Continuous Operation Up to 30V
• Junction Temperature Operation from -40°C to +150°C
(Absolute Maximum)
• Increases Battery Life:
• 1μA Shutdown Supply Current
• 20μA Sleep Mode Quiescent Current
• Advanced Asynchronous Mode (AAM) Increases
Efficiency under Light Loads
• High Performance for Improved Thermals:
• Integrated 70mΩ High-Side and 50mΩ Low-Side
MOSFETs
• 65ns Minimum On Time and 50ns Minimum Off Time
• Optimized for EMC/EMI:
• Frequency Spread Spectrum Modulation
• Symmetric VIN Pinout
• CISPR25 Class 5 Compliant
• 350kHz to 2.5MHz Configurable Switching Frequency
• MeshConnect™ Flip-Chip Package
• Available in a QFN-12 (2mmx3mm)
• Package or a QFN-12 (3mmx4mm)

MPQ2177/78/79, 5.5V Sync 3/2/1A Buck
Features
Wide 2.5V to 5.5V Operating Input Range
Peak 3/2/1A Continuous Current
2.4MHz Switching Frequency
60/35mΩ Low RDS(ON) Internal Power MOSFETs
FCCM
Power Good (PG) Indicator
External Soft-Start selectable
Duty On
Output Discharge
Tj 150C
Fully Protection include OVP/OTP
Short-Circuit Protection with Hiccup Mode
Available in a QFN-8 (1.5mmx2mm)Package
Available in AEC-Q100 Grade 1
MP6540/MP6540H:3-Phase Power Stages
http://qq1299968664.b2b168.com